
Raven X HSUPA
18 20070914
Your Raven X will work with most cellular antennas with a SMA connector.
Connect the primary antenna or primary RF cable directly to the antenna
connector on the back of the Raven X.
Tip:
When using a cable to an antenna placed away from the modem, minimize the length
of your cable. All gain from a more advantageous antenna placement can be lost with a
long cable to the modem.
Connecting to Power
Warning:
Risk of electric shock: Only use the supply voltages listed in this user guide.
Warning:
When using AC to DC adapter the ambient temperature should not exceed
40
0
C.
Your Raven X can be used with either DC or AC, with the appropriate power
adapter. DC cables and AC adapters are available as optional accessories in
addition to the one included with your Raven X.
The DC power cable positive lead should be connected to the battery or power
source positive terminal. The power cable negative lead should be connected to
the battery or power source negative terminal.
Tip:
The DC power cable has a white wire lead in addition to the power positive and
negative. This is for a feature not present in the Raven line modems. In the Raven X, the
white wire lead has no function and can be ignored.
Warning:
Explosion Hazard - Do not disconnect equipment unless power has been
switched off or the area is known to be non-hazardous.
Connecting to a Computer or other Device
Figure 4-2: Ethernet
The Ethernet port of your Raven X can be connected directly to a computer or
other Ethernet device with either a cross-over cable or a straight-through cable.
The Ethernet port on the Raven X is auto-sensing and will auto-detect the speed
of the connecting device for 100baseTX or 10baseT. If you are connecting the
modem to a hub or switch you should use a straight through cable or use the
uplink port on the hub or switch with a cross-over cable.
Comentários a estes Manuais