AirLink Communications Raven X HSDPA Guia do Utilizador descarregar pdf (Página 38)

Configuring your Raven XE

Rev 2.0 Jul.09 31

2. Applying a Template to one modem

with AceManager

Youcanuseatemplateyoucreatedyourself,usingthesteps

above,oratemplateprovidedbyyourAirLinkrepresentative

orsomeoneinyourcompanywhohassetupamodem

template.Thetemplate youwishtoapplymustbesavedto

yourharddrive.

a. Loadthetemplate.

1. Connecttothemodemyouwanttoconfigure

usingAceManager.

2. ClickontheLoadbuttononthetoolbar.

Figure 5-8: AceManager : Load

3. Selectthetemplateyouhavesaved(youmayneed

tochangefoldersifyousavedittoadifferent

location).

b. Verifytheconfigurationsettings.

Tip: After you load the template, it’s best to go back over the

AceManager groups to make sure all the settings are what you

require.

c. ClicktheWritebuttononthetoolbartowritethe

configurationtothemodem.Waitforthe“Write

Successful”message.

Figure 5-9: AceManager : Write

d. Resetthemodem.

Caution: Many of the configuration settings will not take effect until

the modem has been reset.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 124 125

Sem comentários

AirLink Communications Raven X HSDPA Guia do Utilizador Página 38