AirLink Communications Raven X HSDPA Guia do Utilizador descarregar pdf (Página 45)

Configuring your Raven XE

Rev 2.0 Jul.09 38

b. Toseewhatyouaretypingasyoutypeit,youwill

needtoturnontheechoand verbosemode.Type

ATE1V1andpressEnter.

c. Ifyougetareplyof“OK”,thenyouenteredthe

commandsuccessfully.Ifyougetareplyof“0”or

“ERROR”,tryenteringthecommandagain.

AT Commands

Whenusingaterminalapplication,youwillneedtomanually

typeineachcommand.

• Formostcommands,whenyouareenteringthemusinga

terminalconnection,youwillneedtoprefacethe

commandwithAT(exceptionsarenoted),i.e.AT Awhich

islistedasA.

• Somecommandshavespecificparameterswhileother

commandswilltakewhateveryoutype. 

• Requiredvariableparametersaredenotedwithitalicized

text,example,Dn.Thenisvariable.

• Acceptableparametersand/orspecificformatsarelisted

witheachcommand.

• Mostcommandswithparameterscanbeenteredwith?to

readthecurrentvalue(forexample,AT&D?willrespond

with“2”ifthedefaulthasnotbeenchanged).

• Optionalparametersaredenotedwithsquarebrackets[].

• ATCommandsarenotcasesensitive.Acapital“E”isthe

sameasalower‐case“e”.

• Whenyouareusingaterminalconnection,ifyouentera

commandwhichisrecognizedbytheRavenXE,itwill

respondwith“OK”.Ifthecommandisnotrecognized,the

responsewillbe“ERROR”.

• Thosecommandsapplicableonlytocertainmodel

numbersoftheRavenXEwillbenoted.

Caution: Symbols listed with commands, such as *, /, &, or ?, are

part of the command and must be included. Commands with symbols

other than * may require PassThru mode.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 124 125

Sem comentários

AirLink Communications Raven X HSDPA Guia do Utilizador Página 45