AirLink Communications Raven X HSDPA Guia do Utilizador descarregar pdf (Página 73)

Raven X HSDPA for Cingular - User Guide, version 2.33 68

AT Commands: Other

*SNMPTRAPDEST=host/[port]

*SNTP=n

*SNTPADDR=[d.d.d.d][name]

*TELNETTIMEOUT=n

*TPORT=n

n=1 : Authentication equivalent to “authNoPriv” setting in SNMPv3. SNMPv3 is required to do authen-

tication, SNMPv2c transmissions will be silently discarded.

n=2 : Authentication and encryption, equivalent to “authPriv”' setting in SNMPv3. SNMPv3 is required

to do authentication and encryption, SNMPv2c and SNMPv3 authNoPriv transmissions will be silently

discarded. Messages are both authenticated and encrypted to prevent a hacker from viewing its contents.

Controls destination for SNMP Trap messages.

host=IP address

port=TCP port

If port is 0 or host is empty, traps are disabled.

Traps are sent out according to the SNMP security level (i.e. if the security level is 2, traps will

be authenticated and encrypted). Currently, the only trap that can be generated is linkup.

Enables daily SNTP update of the system time.

n=0 : Off

n=1 : On

SNTP Server IP address, or fully-qualified domain name, to use if *SNTP=1.

d.d.d.d=IP

name=domain name

If blank, time.nist.gov is used.

Telnet port inactivity time out.

n=minutes

By default, this value is set to close the AT telnet connection if no data is received for 2 min-

utes.

Sets or queries the port used for the AT Telnet server. If 0 is specified, the AT Telnet server will

be disabled. The default value is 2332. .

n=1-65535

n=0 : Disabled.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 106 107

Sem comentários

AirLink Communications Raven X HSDPA Guia do Utilizador Página 73